Whirlpool ADG7550 854275515860 Int D/W Tripping

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool ADG7550 854275515860 Int D/W Tripping

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 9, 2011 at 6:46 pm #63283
    Justchillin
    Participant

    Hi all,

    This one has got me a little stumped.

    I turn the m/c on, select a program and then it trips when the start button is pressed. This is without the door been closed so none of the normal bits (motor,pump,element etc) are in circuit.

    I suspect the pcb but I can’t see any obvious damage on it and they are a fortune.

    Any ideas anybody.

    Thanks everybody.

    God it’s quiet at the moment.

    Steve

    June 9, 2011 at 10:14 pm #353298
    clivejameson
    Participant

    Re: Whirlpool ADG7550 854275515860 Int D/W Tripping

    I would doubt it’s the pcb unless it’s got wet…aren’t most of the components switched in the neutral in which case they’ll all have a direct live feed?

    Time to megger everything i suspect…

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.