Bosch WVD24520GB/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WVD24520GB/01

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 10, 2011 at 7:02 pm #63311
    rocker
    Participant

    Have no negitive feed to the dryer heater. all else working
    feel it may be pcb fault!! cant find any cut-out ect in neg line.
    can any one give any advice / clues.
    thanks john

    June 11, 2011 at 7:28 am #353422
    Martin
    Participant

    Re: Bosch WVD24520GB/01

    When you set it on dry only does it shut down after a few minutes? Any error codes on the display? Is the valve coil and NTC OK? Does the fan run?

    June 11, 2011 at 10:39 am #353423
    rocker
    Participant

    Re: Bosch WVD24520GB/01

    Martin. fan runs ok / no error codes / ntc reading around 5.12 meter set on 20k / havent checked valve coil !!
    Thanks John

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.