Zanussi ZCM7902XN main oven and clock/timer not working

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Zanussi ZCM7902XN main oven and clock/timer not working

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 12, 2011 at 9:13 am #63320
    ben50
    Participant

    Hi,

    The display/clock/timer etc on our Zanussi ZCM7902XN oven has stopped working along with the main oven. The top oven and grill are still operating as normal though.

    I’m not sure what to check first or if it is economically viable to repair, but it is annoying not to have the main oven as that’s the one we normally use.

    Any ideas/pointers very welcome!

    cheers in advance.

    Ben

    June 12, 2011 at 9:34 am #353449
    kwatt
    Keymaster

    Re: Zanussi ZCM7902XN main oven and clock/timer not working

    There’s a small thermal cut out around about the lamp assembly in the main oven that’s worth checking first. 😉

    If that’s faulty then it may be the cause but I can’t say for sure.

    Other than that all I can see it being is the clock itself.

    K.

    June 12, 2011 at 11:55 am #353450
    ben50
    Participant

    Re: Zanussi ZCM7902XN main oven and clock/timer not working

    Hi, Thanks for the quick reply.

    So, is the ‘thermal cut out’ something that can be tested or should I just replace and see if it works again? Can these and/or the clock itself be purchased in the shop? I’ve had a quick look, but not managed to find either.

    Cheers,

    Ben

    June 12, 2011 at 12:30 pm #353451
    kwatt
    Keymaster

    Re: Zanussi ZCM7902XN main oven and clock/timer not working

    It can be tested. It’s a simple on or off depending on temperature, if the temperature exceeds the preset then it will usually open thereby cutting the power. So, you only need a multimeter to test it.

    K.

    June 12, 2011 at 1:39 pm #353452
    ben50
    Participant

    Re: Zanussi ZCM7902XN main oven and clock/timer not working

    Thanks again, I’ve removed the lamp cover but can’t see anything that looks like it might be a sensor near it, what should I be looking for? sorry if that’s a dumb question! Cheers, Ben

    June 12, 2011 at 6:52 pm #353453
    kwatt
    Keymaster

    Re: Zanussi ZCM7902XN main oven and clock/timer not working

    Oh no, it’s in that area, not in at the lamp itself, you’ll have to get the side panel off to see the stat.

    K.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.