Baumatic, no model number

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Baumatic, no model number

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • June 16, 2011 at 3:16 pm #63409
    loopey
    Participant

    sorry model number has rubbed off does any one reconize it 🙂
    ok it came in for bearings done and sorted .. it will not spin
    with clothes in now . is it pcb or timer not worked on many of these . any help appreciated …..

    phil

    June 16, 2011 at 6:10 pm #353687
    admin
    Keymaster

    Re: Baumatic, no model number

    Belt ajustment…?or poor load..

    if it spins with out a load in it
    then must be one of the above..!

    canufixit

    June 16, 2011 at 6:12 pm #353688
    BobHope
    Participant

    Re: Baumatic, no model number

    it is model no. Mega6SS

    Bob.

    June 16, 2011 at 6:18 pm #353689
    loopey
    Participant

    Re: Baumatic, no model number

    thanks canufixit will give that a go still need a model number
    thow , iff any one can help me with that to just in case it needs parts .
    phil

    June 16, 2011 at 6:20 pm #353690
    loopey
    Participant

    Re: Baumatic, no model number

    wow now thats fast lol answwerd before i asked lol

    June 21, 2011 at 7:00 pm #353691
    loopey
    Participant

    Re: Baumatic, no model number

    ok some times we miss the obvious it was the 2 option buttons ?
    dont no wich one it is as the writing on the bezal is rubbed off … DDOOOHHH

    June 22, 2011 at 9:19 pm #353692
    ampthillmob
    Participant

    Re: Baumatic, no model number

    Most likely pcb, take it out and check it normally problem with soldered joints where connector block fits on, this can be re-soldered.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.