maidaid/sammic c350 problem

Home Forums Public Support Forums Help And Support Dishwasher Help Forum maidaid/sammic c350 problem

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #63478
    LynneW
    Participant

    maidaid c350 – got a leak – not from drain – it’s at the right front corner as far as I can tell but it’s on a support shelf so I can’t tell exactly – haven’t got instructions for maintenance – been using it for 6 years in kitchen of hotel – no problems till now. Cleaned filters etc, when you lift out the filter, even when the machine is drained – there’s a vertical pipe in base of dishwasher that has water in it – what is that ? No obvious leak immediately on filling, so let it heat for 10 mins then leak is apparent.
    I could do with help as it’s a very heavy bit of kit and is hard plumbed in.

    #353892
    electrofix
    Moderator

    Re: maidaid/sammic c350 problem

    it is prob a small leak underneath that dripping slowly and only shows when water builds up
    or does it only leak when you start using it ?

    to find leak you would have to take the front off and look with a torch ( power off )
    as for being plumbed in, it would have to be removed to fix and the pipes are normally flexible

    Dave

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.