Beko D3422FS will not start in any program

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Beko D3422FS will not start in any program

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 21, 2011 at 2:17 pm #63490
    whiskychaser
    Participant

    About two weeks ago the fuse blew in the plug. Not a good sign as they dont usually blow for nothing. But I replaced it and all was fine until today. The power light on the door was on but the machine just wouldnt start. I opened and closed the door a couple of times, it started and completed the full cycle. So I thought the door switch is faulty. But on taking the door front panel off, I found the spring latch mechanism is still very strong and I have continuity across the switch when I ‘cheat’ the lock mechanism. The door lock hook is also intact. I am back to power light on but no start. Any advice on the next thing(s) to check would be greatly appreciated.
    Thanks

    June 22, 2011 at 11:18 am #353925
    whiskychaser
    Participant

    Re: Beko D3422FS will not start in any program

    Update:
    Checked the filter and that is clear. When I put pressure on the door I can hear the microswitch click so that sounds OK. Ordered a new one anyway as the terminals outside the connectors look a little blued. Timer does not move and nothing happens if it is moved manually. No live at any of the pumps. So I am concluding no power from the main switch to the timer and will be checking that. Please feel free to tell me where I am going wrong 🙂

    June 25, 2011 at 12:45 pm #353926
    whiskychaser
    Participant

    Re: Beko D3422FS will not start in any program

    Outcome:
    Original diagnosis was correct. Live from switch broken at the door hinge. Probably because it left the factory with too much tension on it and finally snapped. Job sorted 😀

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.