zwf10020w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zwf10020w

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 21, 2011 at 2:42 pm #63492
    clockworkone
    Participant

    had a look at this one this morn.after approx 5 min it stops and continually flashes red.error 69 came up in diag(element interupted,thermofuse open)checked res and ins on element and both good.now dont ask me why but i failed to check ntc.going back with element thurs so hopeing to get away with just that.paul

    June 21, 2011 at 4:24 pm #353930
    Martin
    Participant

    Re: zwf10020w

    NTC’s are usually very reliable however the connections to them are always suspect.

    June 21, 2011 at 4:35 pm #353931
    clockworkone
    Participant

    Re: zwf10020w

    thanks martin, i did check connections at both ends and all looked good,will stick heater in and see how it goes.cant believe i didnt check ntc readings when i disconnected it :clown: thanks again.paul

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.