ISE Appliances

Home › Forums › Public Support Forums › General Enquiries And Questions › ISE Appliances

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • June 22, 2011 at 12:03 pm #63521
    biger
    Participant

    Been trying to access the ISE Appliances website but no luck. Are they still around and if not how would the ten year guarantee be managed?

    June 22, 2011 at 12:17 pm #354010
    don
    Moderator

    Re: ISE Appliances

    Hi Biger

    The website is still there http://iseappliances.co.uk/ New ISE10 machines were released last year and there are additional new product releases due September this year.

    There is also the detailed section within the site from this link which explains the fund provision for the guarantees.

    HTH 🙂

    Don

    June 22, 2011 at 12:47 pm #354011
    kwatt
    Keymaster

    Re: ISE Appliances

    It could be a DNS error you’re getting as I can see it fine from here and home but I have seen the site timeout a couple of times the past day or two.

    I was working on it yesterday so I know it’s okay. 😉

    K.

    June 22, 2011 at 7:55 pm #354012
    biger
    Participant

    Re: ISE Appliances

    kwatt wrote:It could be a DNS error you’re getting as I can see it fine from here and home but I have seen the site timeout a couple of times the past day or two. )
    K.

    I get this message

    The server at iseappliances.co.uk is taking too long to respond

    Glad it’s nothing to worry about. I’ve got an ISE washer but today got the fault F1 flashing. I’m waiting for the washer guy to get back to me.

    June 22, 2011 at 9:46 pm #354013
    kwatt
    Keymaster

    Re: ISE Appliances

    F1, if it’s a 1606, is either a door close error or an overfill detected if memory serves me.

    Are all the LEDs lit around the start button or just one?

    K.

    June 23, 2011 at 7:04 am #354014
    biger
    Participant

    Re: ISE Appliances

    Yes, all the LED’s are lit. The washer is very full of water (and towels) so the overfill suggestion would be right I guess.

    June 23, 2011 at 7:14 am #354015
    kwatt
    Keymaster

    Re: ISE Appliances

    It’s possibly and, quite probably, a blockage in the pump that’s caused it. 😕

    K.

    June 24, 2011 at 5:39 am #354016
    biger
    Participant

    Re: ISE Appliances

    Problem solved. We emptied the water from the machine and checked the pump which was full of fluff but F3 was then flashing. Managed to ring the washer man and he suggested checking the other end that drains into the waste and again, that was full of fluff from a new bathmat. Got rid of the blockage and all is now well. Still can’t get on the ISE website though.
    Thanks for the assistance.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.