- This topic has 6 replies, 3 voices, and was last updated 14 years, 9 months ago by
.
-
Posts
-
Hi all,
I have a Beko WM51OOW. when i switch power on and select program nothing happens. Prewash light flashes(second light on top row) and ready light stays on full(first light bottom row) its like this for all progs except rinse/spin, then prewash flashes, ready and wash flashing(1st and 2nd bottom lights) and spin/end(third bottom) io on.
when i removed machine top i discovered that the selector switch had come apart from its tabs.i clipped it back as best i could but not sure now if positioning is correct.
machine still the same anyway.
can i take it that this switch is the problem or was it broke in anger (not by me) due to another problem. brushes,heater.inlet valve ok. have’nt checked tacho yet.
Any help appreciated. thanks.Re: Beko help needed…
washman3 wrote:can i take it that this switch is the problem
I’d start by replacing it then go from there. 💡
Re: Beko help needed…
replaced selector switch and reset machine by pressing 2 buttons overhead padlock symbol for 3 secs.
washing perfectly again. thanks for help.Re: Beko help needed…
washman3 wrote: reset machine by pressing 2 buttons overhead padlock symbol for 3 secs.
washing perfectly again. thanks for help.
Had you tried child lock reset before changing switch? :rolls:Re: Beko help needed…
Seamy wrote:Had you tried child lock reset before changing switch? :rolls:
But he already admitted to breaking the selector switch in the first place Seamy. 😉
- You must be logged in to reply to this topic.