31er14mht regulator replaced by 41er102c1p

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › 31er14mht regulator replaced by 41er102c1p

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 1, 2011 at 1:21 pm #63695
    allan73
    Participant

    I’ve got to replace a hob regulator on an old belling farmhouse range.The original is an old green and black 31er14mht and has been superseeded to a 41er102 beige in colour.
    I’ve looked at the diamond h wiring reference in my whitegoods book, but i’m a little unsure where the feed for the pilot light comes from.Can anyone help me on this ?

    Allan

    July 1, 2011 at 7:28 pm #354558
    aqualectric
    Participant

    Re: 31er14mht regulator replaced by 41er102c1p

    The link wire supplied with the regulator fits between P1 (line) and 4 to provide a supply at 4. The pilot is connected to P2 as the switch for the lamp is between 4 and P2.

    HTH,

    Steve.

    July 1, 2011 at 8:07 pm #354559
    allan73
    Participant

    Re: 31er14mht regulator replaced by 41er102c1p

    Cheers Steve, I didn’t get a link wire with it but I’m sure i can knock one up 8)

    Allan.

    July 2, 2011 at 8:57 am #354560
    allan73
    Participant

    Re: 31er14mht regulator replaced by 41er102c1p

    Am i correct in thinking the load output would be from no2 not sure about the neutral?

    Thanks again,
    Allan.

    July 5, 2011 at 10:37 am #354561
    allan73
    Participant

    Re: 31er14mht regulator replaced by 41er102c1p

    Please ignore my last post, just reread diamond h wireing reference properly 😳

    Allan.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.