whirlpool AWM1404/4

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › whirlpool AWM1404/4

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 1, 2011 at 2:08 pm #63698
    paulwma
    Participant

    I need a bearing seal of an AWM1404/4 The one that is being sold with the bearings on this site is to small i just need the seal only
    The size and information on the seal, i removed from the machine is as follows
    The outer diameter of the seal is 75mm the inner hole is 35mm the thickness is about 10mm
    Their is also some numberS on the seal they are as follows
    B+S
    004/5
    4619 710 73251
    TR

    July 1, 2011 at 2:26 pm #354571
    don
    Moderator

    Re: whirlpool AWM1404/4

    Hi

    Can you post up the 12 number code which starts with 8570247 for an acurate id please as there are multiple versions of that model.

    Label is on the inside of the door usually on the machine side.

    Don

    July 3, 2011 at 9:51 am #354572
    paulwma
    Participant

    Re: whirlpool AWM1404/4

    Yes the number is 857024715390
    Would you also replace the tub seal?
    and put the type of grease sold from this site on the shaft?

    July 4, 2011 at 7:29 am #354573
    don
    Moderator

    Re: whirlpool AWM1404/4

    Hi

    Bearing seal part number 481253058142, tub seal is 481253058101.
    Both can be ordered through the shop, just send an email to Dave at spares@ukwhitegoods.co.uk A little grease would help as well 😉

    Don

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.