beko wma 520 drum

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › beko wma 520 drum

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 1, 2011 at 5:05 pm #63702
    JENKS
    Participant

    hi everyone,i was called out to a beko wma520 this afternoon with reports of noise during spin,naturally i thought bearings.on arrival bearings seemed fine but when machine was run on spin cycle it seem to knock.i suspect the spider as there is knock if you rock the drum side to side.has anyone had this before and can i purchase the spider separate or is it a whole new drum.

    July 1, 2011 at 5:13 pm #354583
    johnmac11
    Participant

    Re: beko wma 520 drum

    It looks like a complete drum but it only costs about £26+vat from CDSL

    John

    July 1, 2011 at 5:25 pm #354584
    washtronics
    Participant

    Re: beko wma 520 drum

    i have had some beko machines where the bottom weight becomes loose

    July 1, 2011 at 8:04 pm #354585
    JENKS
    Participant

    Re: beko wma 520 drum

    never thought of checking bottom weight,will check that when i go back,thanks

    July 4, 2011 at 9:43 am #354586
    DDSDDS
    Participant

    Re: beko wma 520 drum

    i have had lots of bekos with loose or missing bottom weights either that or the motor just falls off

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.