Hotpoint BFI620 Dishwasher – Water leaking out sides

Hello,
Grateful for any help here..

As per the title I have a problem with my dishwasher leaking out the sides (very bottom corners). When the cycle starts there is just a little leak each side, then it gets progressively worse. When the cycle has a pool of water in the base it seems to sloosh and push water out the sides.

I’ve been scouting around the forums and have checked the following:-

1) Bottom and side seals: (just incase they have come off or perished) – they seem to be fine and in place. Although the bottom seal seems to stop short of the edges where the water is leaking from. I imagine this is normal because it worked fine before.

2) Adjusting the door:- I tried tightening the ‘allen key’ screws at the top of the door to bring the door further in at the bottom. – Unfortunately this didnt make any difference.

I have also randomly opening the door to see if the paddles are spinning properly – the bottom one is fine but the top one doesnt appear to be spinning at all – although there is water coming out. (this may / may not have anything to do with it??)

I’m wondering if there is too much ‘dirty water’ congregating in the bottom area – this would certainly explain the ‘slooshing’ of water to overspill?…maybe… 😕 ….maybe not.

I’ve checked the filters, or what I think is the filters and they seem fine. All water drains as normal – albeit half way accross my floor 🙁

Like I say.. any help is much appreciated.

Thanks
Chris.