old hoover

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › old hoover

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • July 12, 2011 at 8:27 am #63882
    dopper
    Participant

    its a ac170 she says when it gets to -2 on a number 5 programme it stops, says when she puts on spin works ok anyone help?
    dop

    July 12, 2011 at 10:04 am #355298
    electrofix
    Moderator

    Re: old hoover

    codes
    -6 rinse 1
    -5 rinse 2
    -4 rinse 3
    -3 rinse 4
    -2 spin
    -1 condiioning rinse
    0 end

    have you tried pressure bell ?

    Dave

    July 12, 2011 at 11:42 am #355299
    dopper
    Participant

    Re: old hoover

    cheers will take a look

    July 13, 2011 at 11:37 am #355300
    pegasusk7
    Participant

    Re: old hoover

    pressure chamber or partial pump blockage?

    Phil

    July 13, 2011 at 11:57 am #355301
    Martin
    Participant

    Re: old hoover

    Programme 5? Doesn’t that include a rinse hold?

    Air bell problems and the door don’t open as interlock says no!

    I wonder what it is?

    :popcorn:

    July 13, 2011 at 12:52 pm #355302
    timdowning
    Participant

    Re: old hoover

    Programme 5? Doesn’t that include a rinse hold?

    If it does, the start light will be flashing when it gets to the rinse hold stage. Just press the start button once to move onto spin.

    July 13, 2011 at 1:00 pm #355303
    pegasusk7
    Participant

    Re: old hoover

    Programme 5 was good old Non Fast Coloureds so no creaseguard there. Manual still available at: http://service.hoover.co.uk/manuals/pdfs/AC170.pdf

    Phil

    July 18, 2011 at 12:05 pm #355304
    dopper
    Participant

    Re: old hoover

    board was knacked

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.