Qualtex oven glass glue

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Qualtex oven glass glue

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 22, 2011 at 9:34 am #64089
    Micky 32
    Participant

    Is this stuff pure crap or something? I seem to have problems it curing properly, not the first time either 😡 . I just hope the heat of the oven cures it? Any experiences with this stuff?

    July 22, 2011 at 1:05 pm #356006
    leavemetogetonwithit
    Participant

    Re: Qualtex oven glass glue

    Takes about 24hrs I think. Preferably, oven door needs to be left on a table somewhere and undisturbed.
    Mike.

    July 22, 2011 at 1:22 pm #356007
    admin
    Keymaster

    Re: Qualtex oven glass glue

    Hi

    It’s a hight temp silicone so NONE instant set.We use masking tape to hold in place and leave door off on side and advise the customer to refit 24hrs later.Did you read the instructions ?

    bryan

    July 22, 2011 at 2:52 pm #356008
    washtronics
    Participant

    Re: Qualtex oven glass glue

    i have used it and as long as is held with tape for 24 hours its works ok, no problems – i have use it many times

    July 22, 2011 at 5:10 pm #356009
    Micky 32
    Participant

    Re: Qualtex oven glass glue

    Yes i had the door at home on the table for 24 hours and found sometimes it’s not set fully.

    July 22, 2011 at 7:40 pm #356010
    loopey
    Participant

    Re: Qualtex oven glass glue

    compress it as much as possable the thinner the glue is, the faster it sets , good old gaffer tape does the trick or some thing heavey placed on it . i find the spring loaded g clamps work the best . never had a call back yet . i have refitted doors after six hours with out a problem …

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.