Zanussi DW and earlier dishwashers.

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Zanussi DW and earlier dishwashers.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #6417
    ChrisR
    Participant

    Hi all 😀

    I may have asked this question before but I can`t find it anywere so here we go again.

    No incoming water is the fault.I`ve checked all the normal things,pressure chamber and hoses,changed the safty valve,identfied live and neutral return but still no water although I can hear the valve working and yes the water is turned on.
    I`ve had this fault many times and it normally disappears when I change the valve but no matter what I do ,this one is a real b…..d.

    I feel I should know this fault but I cannot remember it.

    Any help gratefully received.

    Thanks.

    Chris.

    #117537
    smartin
    Participant

    Re: Zanussi DW and earlier dishwashers.

    someone told me a while ago that some zanussi dishwashers suffer from irreverseable air locks, iv had 1 of those and ended up writing it off, hope this helps smartin

    #117538
    Dave_Conway
    Participant

    Re: Zanussi DW and earlier dishwashers.

    There’s your old one Chris:

    http://www.ukwhitegoods.co.uk/modules.p … opic&t=625

    Alex’s reply should answer that one for you.

    Dave.

    #117539
    ChrisR
    Participant

    Re: Zanussi DW and earlier dishwashers.

    Hi Dave.

    Yeah I`ve read that one but this is a different fault.

    Thanks.

    #117540
    Dave_Conway
    Participant

    Re: Zanussi DW and earlier dishwashers.

    Which model is it you have the problem with ?

    #117541
    Penguin45
    Participant

    If it’s the old series machines it’s time to investigate the blue tubes in the bottom of the sump. Clean them, associated pressure tubing and keep your fingers crossed. The pressure switch can fill up with water with these oldies by the way.

    Ah, it was all so much fun. Good grief, am I turning into Old Tog II?

    Chris.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.