WT960 child lock fault ..

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › WT960 child lock fault ..

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 28, 2011 at 9:12 pm #64211
    robdray
    Participant

    Having selected child lock function, bar appears above “child lock” to indicate it has been selected but child lock function doesn’t operate .. i.e any button pushed has an effect ..

    Any ideas gents ?

    July 28, 2011 at 10:02 pm #356405
    iadom
    Moderator

    Re: WT960 child lock fault ..

    It may be a console PCB fault,

    This is from the manual Rob.

    Child Lock
    When activated all the buttons will be disabled and a child will not be able to alter any wash
    programme or option settings. Once selected this feature remains activated, even when the
    machine is off.
    To use this feature press the Child Lock button. The child lock icon will light and the feature is
    activated. If any of the control buttons are pressed, the child lock icon will flash and the machine will
    bleep 3 times: no alterations to the control settings will be allowed.
    If power is interrupted, at any time, pressing any button will reactivate the child lock feature.
    To deactivate this feature hold the Child Lock button down for 2 seconds. You will then hear a bleep
    and the child lock icon will go out.

    If you want the full Monty, PM or e-mail me an e-mail address and I will send it to you.

    Jim.

    July 29, 2011 at 7:56 am #356406
    robdray
    Participant

    Re: WT960 child lock fault ..

    Thank you Jim .. Appreciated.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.