Fisher & Paykel DD603H

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Fisher & Paykel DD603H

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 2, 2011 at 1:31 pm #64277
    Ray9500
    Participant

    I managed to change the heater in the top drawer of one of these a few months back, not done one before!
    It has been working fine but now the top drawer is completely dead :eeek: Should i be checking the heater again or the PCB in the base? how on earth do you get inside these beasties??
    Many thanks for any help or pointers, i don’t want to make this worse than it is :boops:

    Ray

    August 2, 2011 at 1:53 pm #356592
    johnmac11
    Participant

    Re: Fisher & Paykel DD603H

    If one drawer is dead is usually the heater plate open circuit.

    John

    August 3, 2011 at 7:54 am #356593
    Ray9500
    Participant

    Re: Fisher & Paykel DD603H

    Thanks John,
    I have recently fitted a element to this drawer, do they fail this quick? or possibly not fitted correctly! 😳
    Ray

    August 3, 2011 at 6:05 pm #356594
    johnmac11
    Participant

    Re: Fisher & Paykel DD603H

    Dont see how you could have fitted it wrongly, if it was in wrong it would leak everywhere.

    It is not often that they fail this quick but I have come across it before. PM me your email address and I will send you some info that will help.

    John

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.