AEG PNC914524113 L74810 module configuration

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG PNC914524113 L74810 module configuration

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 22, 2011 at 10:26 am #64626
    neilbow
    Participant

    I have ordered from connections a replacement board for a AEG washing machine part number 13240338304 this has come as an un-configured board and there are no instructions how to configure it. I have looked up my TDS manuals and there is no configration info. can anybody help Many Thanks Neil :clown:

    August 22, 2011 at 6:23 pm #357592
    Seamy
    Participant

    Re: AEG PNC914524113 L74810 module configuration

    You need a friendly Service Force engineer who has SideKick software on the laptop to configure the board, takes about a minute to do a P.C.B .

    Just out of interest how much did the board cost?
    There is very little difference of the configured & unconfigured boards listed on A.E.G/Lux website..

    “587 ELECTRONICS MODULE,NOT CONFIGU
    (The part needs specific software and trained technicians for installation)
    1 106.07
    GBP 132 40 38-30/4
    587 PCB,CONFIGURED,EWM1000+
    1 104.93
    GBP 9739 1452 41 13-00/3 “

    August 23, 2011 at 1:26 pm #357593
    neilbow
    Participant

    Re: AEG PNC914524113 L74810 module configuration

    Thanks Seamy, that’s what I had guessed. but nice to have it confirmed. Best Regards Neil :boops:

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.