ISE 1607W Washing Machine Seal between inner & outer frames

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › ISE 1607W Washing Machine Seal between inner & outer frames

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 24, 2011 at 4:07 pm #64669
    manukarik
    Participant

    The seal (grey and black rubber) between the inner and outer frames of the above machine (close to the door) has fallen off. Any advice on how to refit it correctly?

    I can fit it, but the black rubber shows now (it didn’t before) and it leaves a gap between the 2 frames, which wasn’t there before.

    I have emailed ise appliances, but have had no reply.

    Many thanks . . .

    August 24, 2011 at 4:52 pm #357713
    kwatt
    Keymaster

    Re: ISE 1607W Washing Machine Seal between inner & outer fra

    Odd getting no reply. 😕

    The seal is just a simple push fit as it’s a guard that’s there more for aesthetic than for any particular purpose as such.

    HTH

    K.

    August 24, 2011 at 5:20 pm #357714
    manukarik
    Participant

    Re: ISE 1607W Washing Machine Seal between inner & outer fra

    Thanks – as always quick to answer! 😀

    I’ll try again – when I fitted it last time it left quite a gap. Just wanted to make sure I didn’t get any water on anything electric!

    Cheers

    August 24, 2011 at 5:34 pm #357715
    kwatt
    Keymaster

    Re: ISE 1607W Washing Machine Seal between inner & outer fra

    No, no need to worry about that. All that seal is there for really is to stop little fingers from poking about where they shouldn’t be, Swedish child safety and all that. So there’s no real chance of that.

    K.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.