Zanussi FJ1295 Short Spin problem

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Zanussi FJ1295 Short Spin problem

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 24, 2011 at 5:40 pm #64671
    JamieH
    Participant

    When there’s a programme including Short Spin, the machine simply comes to a standstill, whereas if one involves a Long Spin, there is no trouble at all.
    I’ve taken the top off and looked at the circuit board on the programme.
    There appear to be no wires connected to the area which says b1,b2 and b3.
    Should there be some connection there?
    Otherwise, can anyone advise on how to fix the Short Spin problem?

    August 24, 2011 at 7:07 pm #357717
    Washman
    Participant

    Re: Zanussi FJ1295 Short Spin problem

    Hi

    Have you got the Rinse hold button pressed in ,
    No drain (Rinse Hold): stops the appliance with water in the tub after the last rinse of the
    SYNTHETICS, DELICATES and WOOLLENS. By pressing the push button again, the cycle is
    completed with a drain and a short spin; on the washer dryers the drying is also performed .

    Washman

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.