Hotpoint wd32 1200 motor

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint wd32 1200 motor

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 29, 2011 at 7:32 am #64739
    allan
    Participant

    Hi managed to get a replacement motor for this classic wd 😀 the part no. Is HPTC00203638. Now on the info sheet it says this motor is a direct replacement for inline 6 and 7 way rast 5 type of plug, which this one is, but the original motor has 7 pins the new one only has 6 pins so I have on my plug a spare wire going nowhere, have run it up and seems to work ok even on dry! On the back of the sheet it shows alternate wiring of different spin and plug styles to change to inclosed new plug from 800 to 1200 spin, on the older 1200 it shows it as having the six wires plus an extra lead. Confused ❓ advice would be much appreciated
    Allan

    August 29, 2011 at 7:40 am #357945
    Allsorts
    Participant

    Re: Hotpoint wd32 1200 motor

    Allan,

    Could I have a copy of the sheet you received with the motor please?

    George

    August 29, 2011 at 8:02 am #357946
    allan
    Participant

    Re: Hotpoint wd32 1200 motor

    Yes will scan later and send you a copy
    Allan

    August 30, 2011 at 5:20 pm #357947
    leavemetogetonwithit
    Participant

    Re: Hotpoint wd32 1200 motor

    Think the extra lead was to a split field coil, so maybe it gets 1000 now but not 1200?
    Mike.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.