Creda T622CW Condenser Dryer

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Creda T622CW Condenser Dryer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 4, 2011 at 9:35 pm #64851
    juicehills
    Participant

    Hi,
    My Creda Simplicity condenser dryer T622CW has stopped heating, it works fine in every other way, is it l;ikely to be the thermostat or element, or is there something simple that I may be missing?
    many thanks for your help
    Colin

    September 4, 2011 at 10:08 pm #358294
    iadom
    Moderator

    Re: Creda T622CW Condenser Dryer

    Most common cause is the thermostats but you should always check them for continuity first with a suitable megger or multimeter. They are behind the small back panel, just above the heater.

    Be sure to remove the mains plug before you open it up. The stats you require if faulty are HERE

    Sometimes the stats will fail with age but common causes are badly blocked condensor, stopping the machine mid cycle to check on the clothes or capacitor failure.

    If you do order new stats then handle them with care, do not press on the base of the green spot stat.

    September 4, 2011 at 10:11 pm #358295
    juicehills
    Participant

    Re: Creda T622CW Condenser Dryer

    Thanks very much Iadom, I’ll check that out, I suspect opening the door to check if dry could be the cause!
    many thanks
    Colin

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.