bosch wae241

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bosch wae241

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 5, 2011 at 3:44 pm #64865
    AASWALES
    Participant

    hi this Bosch wae2416sgb/01 fd 8607 10367 is not starting the light come on press start nothing happens i have changed door interlock but still no change it does not lock the door or start any ideas

    thanks Alan

    September 5, 2011 at 4:51 pm #358329
    Martin
    Participant

    Re: bosch wae241

    Could be that the interlock has taken out the module? Take a close look at the module for blown surface components.

    Sent from my GT-I9000 using Tapatalk

    September 5, 2011 at 5:59 pm #358330
    AASWALES
    Participant

    Re: bosch wae241

    hi i did have a look and no sign of a blow on the module , it seems like a module fault thanks alan

    September 5, 2011 at 6:04 pm #358331
    AASWALES
    Participant

    Re: bosch wae241

    hi a quick question this machine lists 2 different modules power module and control module what one do you think is the culprit ?

    September 6, 2011 at 1:59 am #358332
    gandh1
    Participant

    Re: bosch wae241

    AA have you engaged the interlock manually using a screwdriver (prog obv set to drain only) only ask cos some of the classixx’s came with plastic peckers that would wear quite quickly, service replacement was a metal pecker. even had a bnib bosch turn up and when lifting it off the base packaging the door swung open cos the plastic pecker had snapped in transit.

    September 6, 2011 at 8:04 am #358333
    AASWALES
    Participant

    Re: bosch wae241

    hi gandh1 thanks for your reply i will have to go back and look at that i didnt think of the door pecker thanks alan

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.