Zanussi DA6141 Dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi DA6141 Dishwasher

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • October 12, 2004 at 5:32 pm #6494
    tonyclifton
    Blocked

    been to above machine custmor reports after runnin 4 20mins smells of rotten eggs. checked drain pipes etc cleaned out filter checked wiring nothin burnt dont effect wash cycle just when open door smells of rotten eggs any ideas? part from dont open door till finished 😆

    October 13, 2004 at 9:18 am #117980
    Dave_Conway
    Participant

    Re: Zanussi DA6141 Dishwasher

    They eat of lot of eggs maybe ? 😆

    October 13, 2004 at 2:25 pm #117981
    tonyclifton
    Blocked

    Re: Zanussi DA6141 Dishwasher

    nope dave already asked that. they put in finish cleaner,lemon juice and many others all works fine no smell till been running 15- 20 mins then smells real bad. but all works fine and does not effect the dishwasher cycle.

    October 13, 2004 at 2:49 pm #117982
    philfish
    Participant

    Re: Zanussi DA6141 Dishwasher

    anything stuck on the element or under the element like them little plastic medicine spoons?

    October 13, 2004 at 2:54 pm #117983
    tonyclifton
    Blocked

    Re: Zanussi DA6141 Dishwasher

    nothing stuck on or near element all clean went back to it today pulls water in heats up washes pumps out all ok after 15 mins open door smells close door let run through everything comes out clean and dry no smell 😕

    October 13, 2004 at 3:57 pm #117984
    cornwell40
    Participant

    Re: Zanussi DA6141 Dishwasher

    Blame it on the dog. It always works!!

    Tony C

    October 13, 2004 at 4:04 pm #117985
    tonyclifton
    Blocked

    Re: Zanussi DA6141 Dishwasher

    cheers guys not really helpful as dont have pets or kids

    October 15, 2004 at 1:03 pm #117986
    philfish
    Participant

    Re: Zanussi DA6141 Dishwasher

    tell them not to open the door untill its finished! circ pump is not on its way out is it? or solenoid jammed open etc i take it they are useing all the right tablets/powder/salt etc hard to say what could be mate best of luck anyway

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.