Bosch WTL6305GB/05 low heat output

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Bosch WTL6305GB/05 low heat output

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 12, 2011 at 5:34 pm #65001
    leno
    Participant

    Hi, I am getting very minimal heat. The elements are ok so I,m thinking could it be either the thermistor connected to the heater elements, i have continuity across this, (has a red “button” on the top which is loose, I have tried to push it in thinking it may reset)am getting only 1 volt at this, or the temperature limiter on the top of the element box, which also has continuity. There is a thermistor in front of the fluff filter, but i think thats for the fluff filter warning light. All filters and condenser have been clean and the water hose has been blown through. Any thoughts would be appreciated. Thanks

    September 15, 2011 at 8:48 pm #358763
    leno
    Participant

    Re: Bosch WTL6305GB/05 low heat output

    Update. Replaced part no.s 163297 (Temp limiter) and 154166 (front thermostat)still no joy. Voltage at 600W element is 240V and voltage at 1700W element is 40V to 50V. Water pump dismantled and cleaned out (plenty of fluff there, now good pressure to water container. PCB next??

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.