hotpoint wml 520p error lights flashing

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint wml 520p error lights flashing

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 16, 2011 at 12:55 pm #65095
    slyp98
    Participant

    had a look at this , start led flashing and rinse led also on , couldnt find anything wrong with m/c but the control board has a burn any tech info on these customer sayes it stops between rinse and spin s/n 908 246951 thanks

    September 16, 2011 at 1:48 pm #359125
    iadom
    Moderator

    Re: hotpoint wml 520p error lights flashing

    Error codes are in the Known Error Codes thread.

    HERE

    looks like the dreaded F08/8 flash problem.

    September 22, 2011 at 6:22 pm #359126
    slyp98
    Participant

    Re: hotpoint wml 520p error lights flashing

    apparently the door lock light is flashing is this considered on ? cheers

    September 22, 2011 at 6:28 pm #359127
    BobHope
    Participant

    Re: hotpoint wml 520p error lights flashing

    info emailed,
    hope that helps.

    bob.

    September 29, 2011 at 8:09 am #359128
    slyp98
    Participant

    Re: hotpoint wml 520p error lights flashing

    I had a closer look at this m/c and it states in the tech sheet that one of the option led’s flash with the progress lights if there is an error , in this case it does not and according to the error showing on the panel(without the option led ) it is F17, door lock comm with control board , ive tried this to no avail also i cant get any reading from the ntc

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.