Candy gas hob ignition

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Candy gas hob ignition

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 17, 2004 at 10:36 am #6532
    admin
    Keymaster

    We have a Candy gas hob installed about 20 years ago. There is no indication anywhere I can see of a model type or number. It has a stainless steel top and standard four burner layout. On removing the cover I discovered that the reason the ignition button gives no response is because the ignition module, switch, and bits of the wiring have been removed. The “spark plugs” and their wires are in place still. We would like to replace the missing parts. I expect they will be pretty standard. Do you have any suggestions?

    October 17, 2004 at 10:58 am #118232
    kwatt
    Keymaster

    If it’s 20 years old I’drecommend replacing the hob in all honesty. Specific spares are extremely unlikely to still be available (we often struggle over 8 years old) and other things, like tap seals are liable to go as well.

    K.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.