diplomat adp8902

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › diplomat adp8902

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 29, 2011 at 6:45 pm #65369
    Cocko
    Participant

    my dishwasher starts by draining,fills with water and starts washing for appx 1 min then stops. same on all programs and resetting does nothing – do i need a new control card

    September 29, 2011 at 7:14 pm #360256
    kwatt
    Keymaster

    Re: diplomat adp8902

    Are any lights flashing?

    I wouldn’t assume a control card for any fault, it can be a very expensive mistake to make.

    K.

    September 30, 2011 at 6:20 pm #360257
    Cocko
    Participant

    Re: diplomat adp8902

    K. no lights are flashing except the program light which goes to a solid light when program chosen. The only other time lights flash is after resetting,lights 4&5 which are a solid light when resetting.

    September 30, 2011 at 6:32 pm #360258
    kwatt
    Keymaster

    Re: diplomat adp8902

    I can’t recall that model too well, didn’t see many, but I think these are the error codes for it…

    http://www.ukwhitegoods.co.uk/help/fix- … ights.html

    K.

    October 10, 2011 at 7:24 pm #360259
    Cocko
    Participant

    Re: diplomat adp8902

    not showing any error codes, just stops at start of wash cycle, can end cycle but no lights showing error. wheres a good place to get a new pcb card in the hope it puts it right?

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.