- This topic has 1 reply, 2 voices, and was last updated 14 years, 6 months ago by
.
-
Posts
-
I have a Beko DWD4310W and some 10 days ago it stopped mid cycle and there was water in the bottom. We emptied the water and have done the tilt to it, cleaned out all the pipes but now when I turn it on I get nothing? On some programs I get the green wash lihgt and other the red finish light? I have tried to look how to reset the machine but not sure if I am doing that right as when I did it the green light just kept on flashing? Wondering if there is anything else I can do or not? Any help would be gratefully recieved x Claire
Re: Beko DWD4310W HELP
Its likely a blockage in the drain pump, or filters. Cancel programme by holding start button for 3 secs or more, restart any programme, the drain pump should run, if you don’t hear it or only a faint buzz, theres probably something fouling the pump impellor. If it does drain but won’t fill there may be a water flowmeter fault. Plug out if you are testing anything components.
- You must be logged in to reply to this topic.