Candy GO482/1-80 washing machine

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Candy GO482/1-80 washing machine

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 4, 2011 at 6:25 pm #65449
    scientist
    Participant

    Hi folks, just have a few questions on this model. Customer reports that there’s a noise coming from unit like its about to rock apart. Unit is two years old and is a 8 kg capacity. Bearings is what I suspect as the drum has a slight rocking in it but does spin ok (without the load). Any previous issues with this model that anyone has come across. Thanks in advance..

    October 4, 2011 at 6:28 pm #360566
    BobHope
    Participant

    Re: Candy GO482/1-80 washing machine

    loose front and top counterbalance weights are a very common problem.

    Bob.

    October 4, 2011 at 6:35 pm #360567
    scientist
    Participant

    Re: Candy GO482/1-80 washing machine

    Gotcha… I did tighten them when I was there told customer to hold off on tryiny the unit until I checked this out.. Thanks for the swift reply..

    October 4, 2011 at 10:28 pm #360568
    Firestarter
    Participant

    Candy GO482/1-80 washing machine

    If the bolt holes have worn, it might be worth packing with some poxy-putty

    October 4, 2011 at 10:40 pm #360569
    scientist
    Participant

    Re: Candy GO482/1-80 washing machine

    Do the drums in these units have alot of play on the shaft. I can move the drum up and down about 10mm approx.If the blocks were loose, would prolonged use damage the inner bearing?.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.