- This topic has 3 replies, 3 voices, and was last updated 14 years, 6 months ago by
.
-
Posts
-
Hi, customer complained of machine stopping and light flashing,
i put it through a test program and it flashed the start button light 2 times and the end light 5 times which i assumed was E25 pumping problem.
removed sump hose and drain hose looking for a blockage and then changed the pump it filled and emptied fine,
customer has just texted to say its doing the same thing again,
i suspect the pcb is there a relay on the board that would give this problem, can it be replaced or is it needing a new board,
thanks in advance,Re: zanussi ZWF1221W
suedehead1 wrote:i put it through a test program and it flashed the start button light 2 times and the end light 5 times which i assumed was E25 pumping problem.
I reckon you’re reading that the wrong way round. 😕
The first digit taken from the End LED, the second from the Start LED. That being the case we’re talking E52 (Motor/Motor Tacho problems). 😉
Re: zanussi ZWF1221W
DOH!
I never thought about that thanks very much i feel a bit of an idiot, not for the first time.
- You must be logged in to reply to this topic.