bosch fridge freezer fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bosch fridge freezer fault

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 21, 2011 at 3:00 pm #65805
    abbots
    Participant

    hi,
    hope there are some bosch experts out there to give me some advise.
    KGU3201GB/05

    there is no display or any noise from the machine at all, no lights -nothing.
    done all the obvious checks.
    there is power to the PCB at the back by the compressor.
    the on/off switch is working on the top PCB.
    there are no dry joins or burn marks on either PCB.
    i suspect the top PCB but they are so expensive i’m worried i’m going to plug it in and have no joy.
    any common faults or suggestions.
    any info appreciated.
    john

    October 21, 2011 at 6:16 pm #361896
    weekiteman1r1
    Participant

    Re: bosch fridge freezer fault

    Hey
    Looking for advise on a Kgu machine myself. Not sure why these machines are seemingly so hard to diagnose but im not getting no response on these either.
    Seems typical that dual board machines have us stumped again. See my post, will make extra effort to return somthing of use to you.
    Scott

    October 21, 2011 at 6:54 pm #361897
    abbots
    Participant

    Re: bosch fridge freezer fault

    cheers ,
    appreciate that.
    john

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.