- This topic has 5 replies, 3 voices, and was last updated 14 years, 5 months ago by
.
-
Posts
-
Hi all,im working on a whirlpool adg756 integrated dishwasher,the fault is showing 4 flashes which can indicate drainage failure,Ive checked the pump and its working perfectly and there is no blockage in the drain hose,is there anything else I should look for before delving into the electronics end of things. Any help will be much appreciated,crockett.
Re: whirlpool integrated dishwasher adg756
The pressure switch/diaphragm thingy bob could be clogged. change that first and all will most likely be well.
Nige
Re: whirlpool integrated dishwasher adg756
The diaphragm switch can be easily taken apart amd cleaned which will save you a return visit.
Steve
Re: whirlpool integrated dishwasher adg756
nigegt wrote:I thought you’d taken up tree surgery steve? 😆
Nige
Ah yes the leylandii.
A never ending battle 😈Steve
Re: whirlpool integrated dishwasher adg756
Thanks nigegt and EFS for your replies,the diaphragm and switch are working perfectly,I’ve had alook at the p.c.b. and found a damaged capacitor which I removed and I am waiting to get a replacement its one of two that are similar on the board light blue in colour at 4.7 meu f and 400v,I’ll let you all know how I get on but it might take me some time to get the part,thanks again for your replies, crockett.
- You must be logged in to reply to this topic.