- This topic has 8 replies, 2 voices, and was last updated 14 years, 5 months ago by
.
-
Posts
-
Hi, Could anyone supply me with fault codes for this condenser dryer. After approx 20 seconds of starting I’m getting all the horizontal lights rapidly flashing and RH vertical lights 4+5+6 lit. There was an earth fault on the heater which has cleared after I dryed it out. The machine is just over 1 year.
Re: Hotpoint TCL770G
Bottom 5 of the six, right hand lights used for these, numbered 1 to 5 from bottom to top plus all vertical lights flashing.
Lights 1+2+3 is lower element failure.
Re: Hotpoint TCL770G
Not that one, that only fits the TCL785.
Its a bit complicated, after serial number 00102.0001 it is the new A2 heater, C0027702.
Before serial number 91123.0000 its C00260045, however the new A2 heater was introduced gradually so any machines between those serial numbers can have either.
There is a blue spot at the top right hand side on the back ( looking from rear ) on the ones between serial numbers with the later A2 heater fitted.
Now is that clear? 😀Jim.
Re: Hotpoint TCL770G
:eeek: :eeek: :eeek: I think so! Luckily, it’s a neighbour’s, so it’s no probs to check. Industrial code is 95545700000. Ser number is 907214321. The only two late versions I’ve come across are both 2.3kw. One with main plug and two seperate blue wires to pcb.The other, main plug with red and black wires attached to small edge connector.
- You must be logged in to reply to this topic.