- This topic has 3 replies, 3 voices, and was last updated 21 years, 5 months ago by
.
-
Posts
-
Can anyone tell me what the fault code F03 indicates.The machine is pumping out and filling at the same time and the drum is not moving. Is there and easy fix for a competant DIY’er? I’d be grateful for any advice.
regards
FBRe: Indesit we16 fault code F03
I think you will find its related to the wash heater themistor. This is built into the heater and pretty much impossible to test without replacing it but you could check the wires leading to it. The code is only a guide though and does not nessesarily mean that this is the problem. Remember to isolate the machine from the mains before removing any panel or the lid.
Re: Indesit we16 fault code F03
Top Man!
Well done Eastiman. You were absolutely right with your diagnosis.Stripped the machine down to find a red wire broken away from it’s lucar connector at the heater. Five minutes with some wire strippers and a new connector and the machine is ‘right as rain. I talked up my part to ‘her indoors’ and she thinks I’m a very clever chappie’. Might even get ‘afters following dinner tonight.
Good one my son. Thanks for the tip’
Regards
FBRe: Indesit we16 fault code F03
the brown and black wire into a into a single connector that connected to the thermostat… looked fine .., i still stripped back the brown wire and reconnected it and it seem to have cured the problem, thanx all ..this was the 3rd serch i looked at on google. and as for the wife putting out ..maybe have to rewire her 2
- You must be logged in to reply to this topic.