BHWD129 Lights flash

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BHWD129 Lights flash

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 3, 2011 at 10:43 am #66044
    pmb
    Participant

    Hotpoint BHWD129
    Reported fault from tenants lights flash,Wasnt sure which,Checked normal suspects,All ok.
    Rang back today, Said the following lights are flashing=
    First 4 bottom lights
    1200/600. Mini load. Extra rinse. Super wash.
    Any ideas

    November 3, 2011 at 11:00 am #362839
    iadom
    Moderator

    Re: BHWD129 Lights flash

    KNOWN ERROR CODES 😉

    The lights you mention are not used for error codes. 😕

    November 3, 2011 at 12:22 pm #362840
    roy1
    Participant

    Re: BHWD129 Lights flash

    Could be the dryer Nct.

    November 5, 2011 at 2:10 pm #362841
    pmb
    Participant

    Re: BHWD129 Lights flash

    Looked at it today,Bottom lights all flashing, No power to Dryer valve So I assume its the PCB.
    Connect have the PCB but can anyone tell me if it comes programmed.They have 2 listed for this model,Its the one marked
    Triphase

    November 5, 2011 at 5:36 pm #362842
    iadom
    Moderator

    Re: BHWD129 Lights flash

    Two different PCB’s, three different smart cards.

    Three different models.
    BHWD129UK
    BHWD129UK/1
    BHWD129UKA

    Not sure if EMW are doing these yet but that is by far the best option and you get a better warranty on an EMW refurb than a brand new one.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.