AEG Washer L76650 Will Only Empty

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG Washer L76650 Will Only Empty

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 3, 2011 at 4:48 pm #66058
    a1al
    Participant

    Hi Everyone

    Been out to this one today, door locks and it will only pump out on all programs. Anti flood device is not activated, tested water vavles and heater,no visible signs damage on main pcb, no brushes on motor to check.
    Pnc 914525539(01)

    Anyone got a manual for a test routine or any ideas on problem??

    Thanks for reading

    a1al

    November 3, 2011 at 7:33 pm #362879
    BobHope
    Participant

    Re: AEG Washer L76650 Will Only Empty

    the appliance has an earth leakage somewere, check the heaters and motor with an insulation tester.

    Bob.

    November 3, 2011 at 7:51 pm #362880
    a1al
    Participant

    Re: AEG Washer L76650 Will Only Empty

    Hi Bob

    Thanks for your reply,should the display show a fault in cases like this?

    Alymer

    November 3, 2011 at 7:55 pm #362881
    BobHope
    Participant

    Re: AEG Washer L76650 Will Only Empty

    the earth leakage plays havoc with the electronics, may show random codes, its best to test all external componats first.

    Bob.

    November 3, 2011 at 8:14 pm #362882
    a1al
    Participant

    Re: AEG Washer L76650 Will Only Empty

    Will give it a good test tommorrow hopefully.

    Alymer.

    March 13, 2012 at 8:00 pm #362883
    a1al
    Participant

    Re: AEG Washer L76650 Will Only Empty

    This ended up being a module

    Thanks for all the help

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.