Installing new Thermistor to HNMF2605A

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › Installing new Thermistor to HNMF2605A

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 9, 2011 at 1:52 pm #66182
    caz8687
    Participant

    Hi there,

    I need some advice on installing a new thermistor to my Hoover HNMF2605A Fridge/Freezer.

    I understand that this part is foamed in at the back of the unit.

    What sort of foam do I need to buy to re-foam-in the new part?

    I am guessing it is one of these but not sure which sort I will need: http://search.diy.com/search#w=foam{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}20filler&asug=foam

    Thanks for your help in advance if anyone can help!

    Caroline

    November 10, 2011 at 10:40 pm #363394
    spimps
    Participant

    Re: Installing new Thermistor to HNMF2605A

    Most will do,small amount only needed so buy a small can,try and takeout the old foam in one piece as near as possible so you can seal it back in with the canned foam,use duct tape to support but leave an opening for foam to expand,best left 12 hours and then trim off surplus.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.