LG D/W LD2130 overfilling

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › LG D/W LD2130 overfilling

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 14, 2011 at 7:28 am #66252
    mackos
    Participant

    Hi Guys got a LG d/w the original fault was IE inlet error & the aquasense on the inlet hose was jammed close so I replaced it with one I had in the van, not a Lg one, not sure where it came from really. Anyway fitted it & now its overfilling error FE the paddle wheel is spinning round & the motor does energize at a certain level but it keeps filling till the pump cuts in. Don’t tell me you have to fit an original LG aquasense hose (is the m/c that clever). It never had an overfill problem before I fitted the hose. Help please. Thanks Mack.

    November 14, 2011 at 10:29 pm #363612
    QUICK FIX
    Participant

    Re: LG D/W LD2130 overfilling

    had one b4 even though the motor ran all the blades were all bocked so it doesnt push the water through properly so it thinks no water in machine keeps filling them fault code appears

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.