whirlpool cond dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool cond dryer

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 19, 2011 at 1:01 pm #66361
    abbots
    Participant

    hi,
    AWZ7913
    8575 787 15070

    no heat.
    the element seems fine.
    the stats on the rear of the element seem fine-assuming there is 2 x NC and 1 x NO stat.
    nothing obviously wrong with the temp. probe on the front RHS .not sure what resistances i should expect on the probe though.
    any common faults or PCB problems any one knows about?
    any advise would be appreciated.
    john

    November 19, 2011 at 4:24 pm #363975
    Martin
    Participant

    Re: whirlpool cond dryer

    I’m not sure any stat should be N/O? Unless it’s not a stat but an NTC that is?

    November 19, 2011 at 5:53 pm #363976
    abbots
    Participant

    Re: whirlpool cond dryer

    i thought the same but there are 3 ‘stats’ on this model, all attached to the heaterassemble.
    the 2 outer ones are NC, but the brown centre one is NO i think, has any one got a wiring diagram?
    cheers.
    john

    November 19, 2011 at 6:02 pm #363977
    A1engineer
    Participant

    whirlpool cond dryer

    There is another stat hiding under the front kick panel on r/h side 😉

    November 19, 2011 at 7:56 pm #363978
    johnmac11
    Participant

    Re: whirlpool cond dryer

    Hi John,

    PM me your email address and I will send some info.


    John

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.