Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG D8100-1M Double Oven
- This topic has 7 replies, 3 voices, and was last updated 14 years, 4 months ago by
fennyapps.
-
AuthorPosts
-
December 1, 2011 at 9:58 am #66614
fennyapps
ParticipantI have a problem with the above oven.
“OVEN COMES UP TO TEMPERATURE THEN RANDOMLY SHUTS OFF. SOMETIMES IT WILL COOK FOR 90+ MINUTES OTHERS IT WILL SWITCH OFF AFTER A MINUTE OR TWO.THE FAN OVEN LED WILL GO OFF AND THE TIME LED WILL COME ON”I have swapped over the control board/module from top oven which is the same but still no change any ideas?
Paul
December 1, 2011 at 11:49 am #364672Firestarter
ParticipantAEG D8100-1M Double Oven
Fan relay? Is the cooling fan coming on?
December 2, 2011 at 11:38 am #364673fennyapps
ParticipantRe: AEG D8100-1M Double Oven
Yep the fan is coming on. Once the cooker is reset it works perfectly for a bit then re occurs.
Thanks
PaulDecember 2, 2011 at 4:56 pm #364674Criscold
ParticipantRe: AEG D8100-1M Double Oven
Have just found this
viewtopic.php?f=36&t=53183&p=270015&hilit=d8100#p267582December 3, 2011 at 9:55 am #364675Firestarter
ParticipantAEG D8100-1M Double Oven
I looked at one yesterday, doing the exact same thing, I suspect the left hand power switch as one of the contacts dropped out as I tapped the front panel. This oven has been playing up for nearly a year now and has to be reset almost constantly. My customer had another engineer out when the fault first happened, but he said he could not find the fault as didn’t occur while he was there. I guess I found it more readily as the contact has deteriorated since then.
I’m having trouble locating the part. On Elux’s site it states on the explosion view that the switch comes complete with the front panel and knobs, item 7, but this is not listed. You got any ideas as to what has happened to the panel?
December 3, 2011 at 10:03 am #364676Firestarter
ParticipantAEG D8100-1M Double Oven
Found it on CDSL Mediator, 3115708145
December 3, 2011 at 10:44 am #364677fennyapps
ParticipantRe: AEG D8100-1M Double Oven
Well done on finding the issue, i will get that checked on Monday. I will take a look at distripart and see if that part is actually available.
Thanks again
PaulDecember 5, 2011 at 10:35 am #364678fennyapps
ParticipantRe: AEG D8100-1M Double Oven
Hi Firestarter,
I have checked your part no on Distripart. and also the stainless steel version for my cooker and they are no longer available.
Unless you make a call to distripart directly but it looks like to old..
Paul
-
AuthorPosts
- You must be logged in to reply to this topic.
