hoover vision hd w/m wiring

This topic has 1 reply, 2 voices, and was last updated 14 years, 4 months ago by JENKS.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
December 1, 2011 at 7:20 pm #66628

JENKS
Participant

currently working on hoover w/m vhd844db.plug to main board has been cut off and terminals soldered on.ive checked the 7 wires,i have 1 to the suppressor,1 to control knob,2 to the heater and 3 to the pressure switch.as these were disconnected by a third party i am at a loss to what goes where on the pcb,any help appreciated.

December 2, 2011 at 8:23 am #364714

Martin
Participant

Re: hoover vision hd w/m wiring

Hoover ain’t too generous when it comes to wiring diagrams for this model. Not one shown on the Gias web site anyway. 🙁

Sorry. :con:
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.