Candy CDI1012/1-80 Flashing lights

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Candy CDI1012/1-80 Flashing lights

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 9, 2011 at 6:29 pm #66784
    Latham63
    Participant

    This dishwasher when switched on sometimes shows and does nothing.
    If prog button is repeatedly pressed all 4 prog lights start to flash and eventually a prog can be selected.Upon closing door a beep is heard then lights flash again.If procedure repeated,eventually machine may start,fills and then aborts when wash motor should kick in.Wash motor looks worn out.I suspect it needs new motor +pcb. Or could a knackered motor be upsetting pcb???

    February 9, 2012 at 7:39 am #365207
    Poppins
    Participant

    Re: Candy CDI1012/1-80 Flashing lights

    I have exactly the same symptoms on the same model. Has anybody dealt with this problem before on this model. Is it motor/PCB or both?

    Cheers
    Chris

    February 9, 2012 at 7:45 am #365208
    Poppins
    Participant

    Re: Candy CDI1012/1-80 Flashing lights

    Just found keithwilliams reply to another post. It seems to be the capacitor on the board.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.