Beko wma767s – filling after final spin

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko wma767s – filling after final spin

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 13, 2011 at 9:00 am #66834
    codlets
    Participant

    Hi,

    I have had a call from a customer regarding the above machine.
    At the end of the final spin on every program, the solenoid opens and lets and a small amount of water, enough to soak the clothes again.

    Any ideas guys?

    Thanks

    Leon

    December 13, 2011 at 11:03 am #365381
    Martin
    Participant

    Re: Beko wma767s – filling after final spin

    codlets wrote:Any ideas guys?

    Inlet valve not shutting off?

    December 13, 2011 at 11:16 pm #365382
    codlets
    Participant

    Re: Beko wma767s – filling after final spin

    well, it does shut off ok after filling the machine with water when its supposed to – start of the wash cycle etc.
    But, the problem is it opens right at the end of every program for about 10 seconds or so then closes.

    December 15, 2011 at 10:43 am #365383
    codlets
    Participant

    Re: Beko wma767s – filling after final spin

    bumpty bump !

    December 15, 2011 at 8:44 pm #365384
    Seamy
    Participant

    Re: Beko wma767s – filling after final spin

    Check wiring loom to valves for shorts, sometimes if appliance has been overloaded top weight can bash cables, check connections to NTC also.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.