greasy film

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › greasy film

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 21, 2011 at 9:03 pm #67019
    cstreames
    Participant

    hi all, i am at whits end!

    i have been trying to figure out why my dishwasher is leaving dishes and glasses grubby and they have a greasy film to them. when they are left to steam dry it drys hars and crusty once wet it becomes greasy again.
    one thing i have noticed is that at the end of the wash there is mucky water left at the bottom up to the outlet level so water is leaving the washer.

    i have re plumbed it all, cleaned all the filters etc, added salt and rinse aid and cleaned out with a specified cleaning agent i use the flash powerball tablets this happens on all wash types

    please help

    chris

    December 21, 2011 at 9:18 pm #365993
    Martin
    Participant

    Re: greasy film

    Are the spray arm holes clear?
    Is there plenty of water circulation going on in there?
    Does the water get hot?
    Are you rinsing the crocks before loading?

    December 21, 2011 at 9:24 pm #365994
    cstreames
    Participant

    Re: greasy film

    yea i took them all out and soaked them and cleaned them
    as for circulation im guessing so as you cant see
    when i open it after the cycle its roasting inside and all steamy
    no not rinsing at all i read that you can have problems if they are to clean to start with

    December 21, 2011 at 10:45 pm #365995
    kwatt
    Keymaster

    Re: greasy film

    Hi,

    If you have a trawl through this section…

    http://www.ukwhitegoods.co.uk/help/stai … tains.html

    I you might well find the culprit although, off the top of my head, nothing springs to mind other than poor cleaning in general.

    Is the residue patchy or uniform?

    K.

    December 22, 2011 at 8:30 am #365996
    Martin
    Participant

    Re: greasy film

    cstreames wrote:no not rinsing at all i read that you can have problems if they are to clean to start with

    I think it’s pretty obvious that there’s no water circulation going on in there. Opening and closing the door and noting the position of each spray arm each time you do will establish if they are actually rotating or not.

    Now may be a good time also for you to tell us what make and model number dishwasher you have anyway?

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.