- This topic has 4 replies, 2 voices, and was last updated 21 years, 5 months ago by
.
-
Posts
-
Any body know the Part no for the thin hose that runs from the bottom of soap dispenser down LHS of machine to the pump (i think). Double sided tape on hose clip attaching it to cabinet has lost its stickiness causing hose to flip out and rub against suspension spring.
Re: Hoover AL130 01
Simon,
Its the dispenser breather tube and is Part No: 91620000
Martin
P.S. Have you checked your mail lately by the way?
Re: Hoover AL130 01
Thanks Martin. My local supplier has given me 41010982 ribbed hose replacement. Is this the wrong one?
Re: Hoover AL130 01
The number does in fact cross-refer but I didn’t know it was ribbed 😕 It should be correct though 🙂
(Its about 1 metre long 15mm diameter with a 22mm end to fit the pump as far as I recall)
Martin
Re: Hoover AL130 01
Whilst we are on the subject of ribbed plastic hoses The Merloni/Servis/Diplomat integrated washer dryers with the chafing on drum then splitting inlet valve to soap dispenser hoses now have plastic ribbed ones. Is there a conversion kit from rubber to plastic for these models for future reference?
- You must be logged in to reply to this topic.