- This topic has 3 replies, 2 voices, and was last updated 14 years, 3 months ago by
.
-
Posts
-
Out to a tecnik tkd795/2 – se6tie1gb/13 that needs a new module.
Thing is i know you need to search neffs site for a normal neff coded dw, and substitute the er no’s in the address bar to get the tech diagrams up.
http://www.neff-eshop.com/eshop/neff/gb … SHOPTYPE=A
thing is on the tech diagram it keeps referring to the se6tie1gb/13 as a tkd702 which doesnt make sense. also the diagram shows 4 buttons on the silicone cover for module (part no 264882) which sorta looks right part on connect but cant be sure.
can anyone confirm thats the right module for a tkd795/2 and as a sidenote, will this module fit 4 button fascias too, in which case it should have the software and hypothetically if you had a spare 4 button fascia you could “unlock” a 4th program without any reconfigurement???
Re: Tecnik Bosch/Neff D/W model no.s dont add up
gandh1 wrote:can anyone confirm thats the right module for a tkd795/2
Yes 264882 is the correct module.
gandh1 wrote:and as a sidenote, will this module fit 4 button fascias too, in which case it should have the software and hypothetically if you had a spare 4 button fascia you could “unlock” a 4th program without any reconfigurement???
The module is in fact a 5 button one but uses only 4 of them. Configuring the module involves holding down those 4 buttons together. And can be done with the module in situ. If you’re stuck for a coding sheet (and if you order from Connect you almost certainly will be) then give me a call. 🙂
Re: Tecnik Bosch/Neff D/W model no.s dont add up
sorry i wasnt particularly clear martin,
gandh1 wrote:
thing is on the tech diagram it keeps referring to the se6tie1gb/13 as a tkd702 which doesnt make sense. also the diagram shows 4 buttons on the silicone cover for module (part no 264882) which sorta looks right part on connect but cant be sure.can anyone confirm thats the right module
What i actually meant to say is that the diagram on bsh shows 4 buttons but this tecnik that im with has only 3. therefore coding in situ wont be possible!
Re: Tecnik Bosch/Neff D/W model no.s dont add up
gandh1 wrote:What i actually meant to say is that the diagram on bsh shows 4 buttons but this tecnik that im with has only 3. therefore coding in situ wont be possible!
3, 4 or 5 buttons, whatever, not a problem to set up with the configuration details to hand….easy! 😀
- You must be logged in to reply to this topic.