- This topic has 4 replies, 2 voices, and was last updated 14 years, 3 months ago by
.
-
Posts
-
On Connect comes up as a black & red bodied switch and from other sites this is p/n 4104503. On UKW shop@ & Qualtex comes up as the white and red bodied switch p/n 4104502.
Are these interchangeable? (Can get the white one cheaper off ebay as a one off.)
Mike.Re: Lamona HJA8703 (Hvr/Cdy integr W/D) which selector switc
41014503 selector 22 settings, is the correct part number.
Bob.
Re: Lamona HJA8703 (Hvr/Cdy integr W/D) which selector switc
Hi Mike,
you not had a go at repairing them selectors, its just the sprung contact that needs retensioning and cleaning with switch cleaner.
Bob.
ps do you have technical note 005LB.
Re: Lamona HJA8703 (Hvr/Cdy integr W/D) which selector switc
BobHope wrote:Hi Mike,
you not had a go at repairing them selectors, its just the sprung contact that needs retensioning and cleaning with switch cleaner.
Bob.
ps do you have technical note 005LB.
Hi Bob, I would much appreciate the tech. note and will pm you my email. Although I’m a little dubious about re-tensioning the sprung contact as a long term repair. Am inclined to BER the selector as new ones are so cheap 😳 .
Mike.
- You must be logged in to reply to this topic.