- This topic has 1 reply, 2 voices, and was last updated 14 years, 3 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
On dry prog machine tumbles,drains & takes in water,but doesn`t heat up+ fan doesn`t cut in.
Usually this seems to happen initially,then heater and fan cut in.Pcb fault? No error code is displayed?
There is voltage to all heater terminals.Re: Zanussi WJD1257W Dryer-no heat
Latham63 wrote:
There is voltage to all heater terminals.But maybe no neutral?
Often cut-outs are in neutral side. So need to see if there are any o/c. Also, most modern Lux WDs use thermistors, one is on heater trunking and one in the hose that goes from tub to condenser down near base of cabinet rhs. Orange wires to which often get broken internally by movement during spin etc.
Mike.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.